A post or camp needs eyes on its approaches all day and all night. Guards on towers see only so far, and a free-flying drone has to land to recharge. A tethered drone raises a camera above the perimeter and keeps it there, powered from the ground.
Why a tethered drone suits a fixed post
A post does not move, so the aircraft does not need to. By taking power through the tether the Tethered Surveillance UAV trades range for time on station: it is built to hold one view for hours, day after day.
- A permanent eye. 18-24 hours aloft on ground power, on a tether of 100 m or more.
- Quiet on the spectrum. Control and video run over optical fibre, so there is no radio link while operating.
- Day and night observation. A 4K, 40x zoom day camera and a 640 x 480 thermal/IR camera on a 3-axis gimbal, with a laser range finder of 1,200 m.
- GNSS-denied navigation. Multi-constellation, multi-brand GNSS, backed by an indigenous vision sensor, INS and LiDAR where GNSS is jammed or unavailable.
- Safety built in. Tether monitoring, power-failure alerts and emergency recovery procedures.
What to specify
| Figure | Why it matters at a post | Tethered Surveillance UAV |
|---|---|---|
| Time aloft | A watch that does not stop at shift change | 18-24 h tethered, ground power |
| Tether | Clears walls, towers and terrain around the post | 100 m or more |
| Link | Emission control and jamming resistance | Optical fibre, no radio link while operating |
| Navigation | Operation where GNSS is jammed | Multi-constellation, multi-brand GNSS; vision sensor, INS and LiDAR |
| Observation | Seeing and ranging approaches | 4K, 40x zoom; thermal/IR 640 x 480; laser range finder 1,200 m |
| Ground power | Camps often run on generators | 3 kW minimum power capacity |
| Set-up | Speed of deployment | Under 15 min; 12-15 kg all-up |
How it is used
- Position the station where the tether has a clear path up and the operators are protected.
- Deploy in under 15 minutes. The auto-configuring ground control station needs no manual set-up.
- Raise to working position and monitor the live feed at the post's control point.
- Review the record. The automatic flight log keeps a record of each flight for the post's reports.
Who it suits
The Tethered Surveillance UAV is built for work like this. It suits:
- Army, BSF, ITBP, SSB and Assam Rifles for posts, camps and stretches of border.
- Air Force and Navy stations that need a continuous view of the perimeter.
- CISF and state armed police that guard installations.
- Training establishments and cantonments that want a fixed overwatch point.
Buying it: manufacturer details, GeM and tenders
Star INXS designs and builds the Tethered Surveillance UAV in India and is certified to five ISO management-system standards. You can buy through GeM, an open or limited tender, a defence portal or a direct purchase order.
Our Tender & GeM desk shares OEM authorisations, technical compliance statements and bid documents written against your specification.
- Send the requirement. Attach your tender specification or RFP to the quote request and we respond with a technical compliance statement.
- Write or check the specification. Use the tender specification checklist to list the figures to ask for.
- Keep a one-page sheet. Download the PDF sheet for this use case to attach to your internal note.






