Skip to content

↑↓ to move · Enter to open · / to search from any page

WhatsAppEnquire

Buyer guide

Indoor shooting range tender specification guide

What to write in a tender or RFP for an indoor shooting range: lanes, calibres, bullet trap, ventilation, acoustics, targets and control, with examples.

Star INXS engineering team6 min read

A tender that says only "indoor firing range, 8 lanes" brings bids that cannot be compared. An indoor range is a building, a bullet trap, an air system and a target system in one contract. This checklist sets out the figures to write down and the proof to ask for, with the Star INXS Indoor Shooting Range as an example.

What a good specification does

A good specification states what the range must do, in figures a team can check on site. Write the number of lanes, the firing distance, the calibres and the air and noise limits. Do not write a brand name or a model number.

For each figure, say how it will be tested. An air-flow figure means little unless the tender says where it is measured. A containment claim means little unless the tender names the calibre and the firing position used in the trial.

Figures to write into the specification

Line itemWhat to ask forExample: Indoor Shooting Range
Range length and lanesFiring distance in metres and the number of lanes25-100 m, configured to the site; 6-8 lanes per module
CalibresEvery weapon and calibre to be fired9 mm to 7.62 mm (pistol, carbine, rifle)
Structure and foundationType of building and the base it needsPrefabricated, bullet-resistant steel-composite building on levelled concrete
ContainmentBullet trap type, and whether an outside danger zone is neededSteel bullet trap with deceleration chamber and dust collection; zero escape, no external danger zone
Firing baysPartitions between firers and the firing positionsBullet-resistant glass partitions; standing, kneeling and prone
VentilationFresh-air supply, exhaust filtering and control, with the air-flow figure and where it is measuredFresh-air flow, HEPA-filtered exhaust, automatic control
LightingControl of light levels and lighting on the targetSoftware-controlled; glare-free target illumination
Acoustics and ricochetWall and ceiling treatmentRibbed anti-ricochet wall lining and acoustic baffles
Noise levelMaximum noise inside and outside, and where it is measuredAsk for it in the bid
OperationHours of use and light conditions to be trained24/7, all-weather; dawn, day, dusk and night profiles
TargetsTarget types and exposure timeMulti-function pop-up (2 s or less), horizontal moving, overhead moving, virtual (to 500 m), precision and accuracy station
Range controlWhat one operator controls and what is recordedSingle-operator control room: ventilation, targets, communication, CCTV, live firing results
Scope of deliveryWork included, from survey to trainingSurvey, design, installation and operator training
Warranty and supportWarranty period, AMC and spares after deliverySpares and maintenance after delivery; warranty period: ask for it in the bid

Proof to ask every bidder for

  • OEM authorisation if the bidder is not the manufacturer.
  • Technical compliance statement that answers every line of your specification, line by line.
  • Demonstration or trial. A visit to a working range or a firing trial, with the calibres you named.
  • ISO certificates for the manufacturer, with their scope and validity.
  • Warranty and AMC terms in writing, with what is covered.
  • Training plan for range operators and maintainers: who trains, how many people, and where.
  • Spares list with the consumable parts of the bullet trap, filters and targets.
  • Make in India local-content declaration, as your tender requires.

Common mistakes

  • Copying one vendor's brochure. It narrows the field and can be challenged. Write the outcome you need.
  • Leaving out test conditions. State the calibre, the distance and where air flow and noise are measured.
  • Forgetting the site. Foundation, power and access decide the cost as much as the range itself.
  • Forgetting training and spares. Filters, trap parts and target faces wear out. Ask for them in the bid.
  • Leaving targets vague. Name the target types and the exposure time you need.

Next steps

For the full process see Buying through GeM and tenders. Our Tender & GeM desk provides OEM authorisations, technical compliance statements, detailed spec sheets and budgetary quotes for your requirement. To see the range, read the Indoor Shooting Range page or compare ranges.

Talk to our team

Ask an engineer

Tell us your requirement and we will recommend the right system, with a budgetary quote.

  • 1 dayResponse time
  • GeMTender support
  • IndiaDesigned & built
Ask an engineer →WhatsApp us

WhatsApp +91 98112 22446 (messages only)
Email contact@starinxs.com

Quick enquiry

Prefer WhatsApp? +91 98112 22446Messages only, no calls