Skip to content

↑↓ to move · Enter to open · / to search from any page

WhatsAppEnquire

Buyer guide

Pop-up and moving target tender specification

What to write in a tender for pop-up and moving targets: movements, exposure time, control range, hit sensing, night firing and power, with example figures.

Star INXS engineering team6 min read

Target systems look alike in photographs and differ in the figures. How fast the face appears, how far the remote reaches and how hits are counted decide what training you can run. This checklist sets out the figures to write down, with the Star INXS Multi-Function Pop-Up Target as the main example.

What a good specification does

A good specification states what the target must do in an exercise. Write the movements, the times and the distances as figures. Do not write a brand name or a model number.

For each figure, say how it will be tested. Expose time is measured with a stopwatch on the range. Wind stability needs a wind speed. Remote range needs a distance and a clear line of sight.

Figures to write into the specification

Line itemWhat to ask forExample: Multi-Function Pop-Up Target
MovementsEach movement the target must makePop-up (0-90°), slicing and rotation on the central axis
Expose / hide timeMaximum time to appear and to disappear2 s or less
Exposure and hitsRange of exposure times, and hits before the target hidesProgrammable, 1 s to 2 min; hold-up mode; hits before hide programmable
Wind stabilityWind speed at which the face must stay steadyNo shake or bend up to 25 km/h
Handheld remoteWireless range and displayWireless to 100 m (extendable on wire); backlit graphical LCD and keypad; rechargeable
Range controlDistance from the control room and number of targets run togetherUp to 600 m from the range PC (extendable); 7 targets together or one by one; 8-channel bench console
ExercisesThe drills the system must runReact-on-hit turn-away, snapshot, timed
Hit monitoringSensor type and what is recordedAcoustic hit sensor; hits shown, stored and printable
Night firingTarget lighting and how it is switchedDimmable moonlight-white illumination, switched from the remote
Target facesFigure types and materialFig 11, Fig 12, Rubia, Hostage A / B on robust acrylic
Weight and protectionMaximum weight, and how the mechanism is protected50 kg or less, complete with accessories; steel target box behind a 2 m gabion butt wall
Power and temperatureSupply, backup and operating temperature220-240 V AC with high / low cut-off; 2.5 kVA generator option; -20 °C to +60 °C
Rise-and-fall targetVertical-lift targets for a butt gallery, if neededSingle-Function Pop-Up Target: vertical rise and fall on twin guide rails; timed exposure or fall on hit; 220-240 V AC or battery
Moving targetTrack, speeds, direction and what the carriage carriesMoving Target System: steel trolley track, 400 kg static load; slow / medium / fast; bidirectional; carries the multi-function target box

Proof to ask every bidder for

  • OEM authorisation if the bidder is not the manufacturer.
  • Technical compliance statement that answers every line of your specification, line by line.
  • Demonstration or trial on a range: expose time against a stopwatch, remote range at the stated distance, and hit counting with live rounds.
  • ISO certificates for the manufacturer, with their scope and validity.
  • Warranty and AMC terms in writing, with what is covered.
  • Training plan for range staff: who trains, how many people, and where.
  • Spares list with target faces, hit sensors, motors and batteries.
  • Make in India local-content declaration, as your tender requires.

Common mistakes

  • Copying one vendor's brochure. Write the times and distances you need, not a model name.
  • Leaving out test conditions. A time or a range with no test method cannot be checked at acceptance.
  • Forgetting protection. Say who builds the butt wall or cover that shields the mechanism.
  • Forgetting power on the range. State whether mains power reaches the target line.
  • Forgetting training and spares. Target faces are consumables. Ask for a quantity in the bid.

Next steps

For the full process see Buying through GeM and tenders. Our Tender & GeM desk provides OEM authorisations, technical compliance statements, detailed spec sheets and budgetary quotes for your requirement. To see the targets, read the Multi-Function Pop-Up Target, Single-Function Pop-Up Target and Moving Target System pages.

Talk to our team

Ask an engineer

Tell us your requirement and we will recommend the right system, with a budgetary quote.

  • 1 dayResponse time
  • GeMTender support
  • IndiaDesigned & built
Ask an engineer →WhatsApp us

WhatsApp +91 98112 22446 (messages only)
Email contact@starinxs.com

Quick enquiry

Prefer WhatsApp? +91 98112 22446Messages only, no calls